Setting Up Linksys WRTP54G Router

1. Connect your DSL or Cable modem to the router’s internet port

2. Connect your telephone set or Fax machine to the Phone 1 or Phone 2 (You must have a subscription to a VoIP provider such as vonage)

3. Connect the rest of the PCs to any of the router’s ethernet ports.

4. Open your browser and type in the router’s ip address, default is 192.168.15.1 (http://192.168.15.1)

5. Once connected and prompted for the username and password, Enter admin as username and admin as password.

6. Select your internet connection type, choices are PPPoE, Static IP and Obtain and IP automatically (Consult your provider on what your internet connection type should be.

7. Enter your hostname and domain, Then enter the dns servers provided by your Internet Service Provider.

8. Click on “Save Settings” and power cycle your router.

If you are connected to a cable internet service provider or if your ISP uses MAC address for network provision then you should perform MAC cloning. Follow the steps below.

1. Under basic setup click on “MAC Address Clone” Tab, enable MAC clone service and Click on “Clone” button. Your MAC Address should now appear on MAC Address fields (composed four textbox fields)

2. Click “Click Save Settings” and power cycle your router.